Cmod S7: Breadboardable Spartan 7 Fpga Module

Cmod S7: Breadboardable Spartan-7 FPGA Module

SKU: 410-376

The Cmod, or Carrier Module, family of products is designed to offer quick, simple, and flexible integration of an FPGA into circuit design, prototyping, and learning/hobby projects. The Digilent Cmod S7 is a small, 48-pin DIP form factor board, populated with 36 pins, built around a Xilinx^® Spartan^®-7 FPGA that brings FPGA power and prototyping to a solderless breadboard. The board includes a Quad-SPI flash for programming, as well as a USB-JTAG programming circuit and USB-UART bridge. The Cmod S7 also features a clock source, Pmod port, and onboard I/O with LEDs and pushbuttons. There are 32 FPGA I/O signals, 2 FPGA analog input signals, an external power input rail, and ground that are routed to 100-mil-spaced through-hole pins, making the Cmod S7 compatible with solderless breadboards. This form factor makes the Cmod S7 a great option for flexible and affordable prototyping, or learning FPGA and digital logic circuits. At just .7" by 3.05", it can also be loaded in a standard socket and used in embedded systems. The Spartan-7 FPGA on the Cmod S7 fits performance into a small form-factor packaging. With the MicroBlaze Soft Processor Core from Xilinx, you can create embedded applications with a variety of peripherals, memory, and interfaces. If your design requires transceiver lines or more FPGA resources, we recommend the higher-performance Cmod A7, featuring an Artix-7 FPGA. Guides and demos are available to help users get started quickly with the Cmod S7. These can be found through the Support Materials tab.

Features

• Xilinx Spartan-7 FPGA (XC7S25-1CSGA225C)
  • 3,650 slices containing four 6-input LUTs and 8 flip-flops
  • 1,620 Kbits of fast block RAM
  • Three clock management tile, each with a phase-locked loop and mixed-mode clock manager
  • 80 DSP slices
  • Internal clock speeds exceeding 450 MHz
  • On-chip analog-to-digital converter (XADC)
  • Programmable over JTAG and Quad-SPI Flash
• Memory
  • 4 MB Quad-SPI Flash
• Power
  • Powered from USB or 5V external supply connected to DIP pin 24 (micro USB cable NOT included)
• USB
  • USB-JTAG programming circuitry
  • USB-UART bridge
• Push-buttons and LEDs
  • 2 Buttons
  • 4 LEDs
  • 1 RGB LED
• Expansion Connectors
  • 1 Pmod connector
    • 8 total FPGA I/O
  • 48-pin DIP form-factor headers
    • 36 populated pins
      • 32 total FPGA I/O
      • 2 Single-ended 0-3.3V analog inputs to XADC

• Product Compliance: 
  • HTC: 8473301180
  • ECCN: EAR99